AUDI RS6 / 7

Power Torque
Stock 600hp 800nm
Stage 1 780hp 1000nm
Stage 2 830hp 1080nm
Stage 3 1001hp 1220nm

what you get

Stage 1


  1. Without any hardware upgrades, we can add 180HP and 200NM of torque with our Stage 1 ecu software.
  2. Performance is not just about numbers but the amount of usable power and torque throughout the entire RPM range.
  3. What to expect from Stage 1 besides numbers?
    - Power on demand response from engine.
    - Stronger and lasting pull until redline during acceleration.
    - Wider power band.
    - Extended RPM range.
    - Top speed limiter removed.
    - Left foot braking function. (Optional)
    - Higher launch control rev range. (Optional)<
  5. Stage 1 DSG Tuning is highly recommended to complement engines new power and torque output.

Stage 2


  1. With the recommended hardware upgrades, we can add 230HP and 280NM of torque with our Stage 2 ecu software.
  2. Performance is not just about numbers but the amount of usable power and torque throughout the entire RPM range.
  3. What to expect from Stage 2 besides numbers?
    - Power on demand response from engine.
    - Neck breaking pull until redline during acceleration.
    - Wider power band.
    - Extended RPM range.
    - Top speed limiter removed.
    - O2 sensor MIL removed
    - Left foot braking function. (Optional)
    - Higher launch control rev range. (Optional)
  5. Stage 2 DSG Tuning is highly recommended to complement engines new power and torque output.
  8. Recommended Hardware Upgrades:
    - Air intake System.
    - Intercooler.
    - Downpipe.

Stage 3


  1. With the recommended hardware upgrades, we can add 401HP and 420NM of torque with our Stage 3 - TTE1020 ecu software.
  2. Performance is not just about numbers but the amount of usable power and torque throughout the entire RPM range.
  3. What to expect from Stage 3 - TTE1020 besides numbers?
    - 100 to 200 km/h in 5-6 seconds.
    - Power on demand response from engine.
    - Neck breaking pull until redline during acceleration.
    - Wider power band.
    - Extended RPM range.
    - Top speed limiter removed.
    - O2 sensor MIL removed
    - Left foot braking function. (Optional)
    - Higher launch control rev range. (Optional)
  5. Stage 3 DSG Tuning is highly recommended to complement engines new power and torque output.)
  8. Recommended Hardware Upgrades:
    - Intake Air Intake.
    - ES Intercooler.
    - ES Downpipe.
    - TTE1020 Hybrid Turbocharger.
    - 4 Bar Sensors.
    - Snow Performance Methanol Injection.

fuel efficiency

Everyone loves low fuel consumption and you can achieve this significantly by improving your engine's efficiency via software calibration a.k.a tuning. Besides software calibration, here are the 5 other factors that determine fuel consumption:

  • Quality of fuel
  • Condition of engine
  • Customized rims and tyres
  • Driver's driving style
  • Terrain

How it is done

Click if you are interested in the detailed procedure...